For debug tests, 100% sessions will be captured in the drill-down reports. The default value of smoke validation test criteria:

• Maximum 10 Virtual Users or 100 session/minute rate.
• Maximum duration of 5 minutes or 100 sessions.

Smoke/Validation Test Criteria for FCU

This is used to define the smoke test criteria for the fixed concurrent user test. For example, if the user gives a maximum of 10 VUsers and 30 minutes, then all tests with durations of less than 30 minutes and VUsers lower than 10 will be regarded as smoke tests.

The following fields need to be filled to set the criteria:

• Maximum Virtual Users: Maximum number of virtual Users required for smoke/validation test.
• Maximum Duration: Select the maximum duration required for the smoke/validation test.

SMOKE/VALIDATION TESTS CRITERIA FOR FSR

This is used to define the smoke test criteria for the fixed session rate test. The maximum session rate and the number of sessions can be set by the user. All tests whose session rate is less than equal to 10 and whose number of sessions is less than 1000 will be regarded as smoke tests, for example, if the user provides 10 sessions per minute and 1000 sessions.

The following fields need to be filled to set the criteria:

• Maximum Session Rate(session/min): Enter the maximum number of sessions per minute for the smoke/validation test.
• Maximum Session(s): Select the maximum number of sessions required for the smoke/ validation test.